Fully Assembled Gigabot
From re:3D
Contents
Gigabot Quick Start Guide
Receiving and uncrating
- Check the exterior of the crate for any visible damage
- Inspect the Tip-n-Tell indicators on two sides of the crate
- Inspect Shockwatch indicator on the outside of the crate
Open crate and remove Gigabot
- Remove bed locks and zip ties.
Check bed height and bed level
- Plug in power
- Turn on Gigabot
- Home Z and check bed height
- Very important. The first layer of your print is the foundation of your object. The hot end tip should be about 0.005" above the bed
- Check bed level
- Manually move the print head front to back and right to left over the bed