Difference between revisions of "Fully Assembled Gigabot"

From re:3D
Jump to: navigation, search
(Getting the most from your Gigabot)
Line 13: Line 13:
==Getting the most from your Gigabot==
==Getting the most from your Gigabot==
#Assembly manual for your reference - [[File:Parts_Kit_Box_Opening_Guide_v1.pdf]]
#[http://re3d.dozuki.com/ Dozuki picture guide]
#[[Getting a good print]]
#[[Getting a good print]]
#[[Printing from Gigabot's Viki controller]]
#[[Printing from Gigabot's Viki controller]]

Revision as of 23:02, 30 August 2014

Fully assembled Gigabot

Opening the crate and setting up your Gigabot

  1. Inspect the exterior of the crate for any visible damage
  2. Inspect the Tip-n-Tell indicators on two sides of the crate
  3. Inspect Shockwatch indicator on the outside of the crate

Installing software and start printing

  1. Installing and using software with Gigabot
  2. Calibrating your Gigabot
  3. First Print

Getting the most from your Gigabot

  1. Assembly manual for your reference - File:Parts Kit Box Opening Guide v1.pdf
  2. Dozuki picture guide
  3. Getting a good print
  4. Printing from Gigabot's Viki controller
  5. Tuning hot-end temperature controller
  6. Changing the filament spool
  7. Gigabot maintenance schedule