What types of plastic can I print on my Gigabot?

Your Gigabot can print many types of plastic filament. Any 3mm diameter plastic filament that can be extruded at less than 245C will print with your Gigabot. The re:3D engineering team has tested the following filaments on Gigabot:

PLA -Recommended for ease of printing and versatility of use

1. Hot-end temp of 200-220C
2. Bed temp 60C with BuildTak or 70C with blue painter's tape
3. Print speed of 3600 - 6000mm/min

ABS -More resistant to harsh environments but more warp and twist than PLA

1. Hot-end temp of 220-230C
2. Bed temp 85C with BuildTak or 100C with blue painter's tape
3. Print speed of 3000mm/min

Ninja SemiFlex

1. Hot-end temp of 215-220C
2. Bed temp 20-50C with BuildTak
3. Print speed of 1800mm/min

EcoFlex PLA -Flexible PLA

1. Hot-end temp of 210-220C
2. Bed temp 40C with BuildTak
3. Print speed of 1500mm/min

Tritan by www.taulman3d.com

1. Hot-end temp of 270-290C (requires all-metal hotend)
2. Bed temp 80C with BuildTak or Bed temp 85C on aluminum plate and Elmer's glue stick [[1]].
3. Print speed of 1800mm/min