Difference between revisions of "What types of plastic can I print on my Gigabot?"
From re:3D
(→NinjaFlex -Flexible PLA) |
|||
Line 12: | Line 12: | ||
====NinjaFlex -Flexible PLA==== | ====NinjaFlex -Flexible PLA==== | ||
− | #Hot-end temp of | + | #Hot-end temp of 210-225C |
− | #Bed temp | + | #Bed temp 20-50C with BuildTak |
− | #Print speed of | + | #Print speed of 1800mm/min |
====EcoFlex PLA -Flexible PLA==== | ====EcoFlex PLA -Flexible PLA==== |
Revision as of 19:38, 25 October 2014
Your Gigabot can print many types of plastic filament. Any 3mm diameter plastic filament that can be extruded at less than 245C will print with your Gigabot. The re:3D engineering team has tested the following filaments on Gigabot:
Contents
PLA -Recommended for ease of printing and versatility of use
- Hot-end temp of 200-220C
- Bed temp 60C with BuildTak or 70C with blue painter's tape
- Print speed of 3600mm/min
ABS -More resistant to harsh environments but tend to warp and twist more than PLA
- Hot-end temp of 220-230C
- Bed temp 85C with BuildTak or 100C with blue painter's tape
- Print speed of 3000mm/min
NinjaFlex -Flexible PLA
- Hot-end temp of 210-225C
- Bed temp 20-50C with BuildTak
- Print speed of 1800mm/min
EcoFlex PLA -Flexible PLA
- Hot-end temp of 210-220C
- Bed temp 40C with BuildTak
- Print speed of 1500mm/min
T-Glasse
Coming soon: