Difference between revisions of "First Print"
From re:3D
(→Using Simplify3D) |
(→Workflow) |
||
Line 1: | Line 1: | ||
====Workflow==== | ====Workflow==== | ||
+ | =====We Highly recommend Gigabot prints from the on-board microSD card===== | ||
#Start with 3D CAD model in .stl file format. | #Start with 3D CAD model in .stl file format. | ||
#Use Simplify3D or Slic3r to process the model and export the G-code instructions for Gigabot. | #Use Simplify3D or Slic3r to process the model and export the G-code instructions for Gigabot. | ||
+ | #Place the G-code on the microSD card and print directly from the Viki controller. | ||
+ | -or- | ||
#Use Pronterface to either: | #Use Pronterface to either: | ||
− | |||
##Start the print from Gigabot's on-board microSD card. | ##Start the print from Gigabot's on-board microSD card. | ||
+ | ##Feed the G-code instructions to Gigabot. | ||
====Using Simplify3D==== | ====Using Simplify3D==== |
Revision as of 13:27, 18 October 2014
Contents
Workflow
We Highly recommend Gigabot prints from the on-board microSD card
- Start with 3D CAD model in .stl file format.
- Use Simplify3D or Slic3r to process the model and export the G-code instructions for Gigabot.
- Place the G-code on the microSD card and print directly from the Viki controller.
-or-
- Use Pronterface to either:
- Start the print from Gigabot's on-board microSD card.
- Feed the G-code instructions to Gigabot.
Using Simplify3D
- Download the File:20mm-box.stl
- Open Simplify3D and import the 20mm-box.stl
- Check that the Gigabot settings are selected and active in Simplify3D under "Edit Process Settings"
- From the main screen in Simplify3D click on "Prepare to Print" button
- Save the G-code file to your computer
- Open Pronterface and connect to Gigabot
- In Pronterface click on "Load File" and open the G-code file generated by Simplify3D
- The tool path will show in the Pronterface preview window
- Click "Print" and Gigabot will begin heating the bed, then heating the hot-end and then begin printing.
OR
Using Slic3r
- Download the File:20mm-box.stl
- Open Slic3r and import the 20mm-box.stl
- Check that the Gigabot settings are selected and active in Slic3r
- From the main screen in Slic3r click on Export G-code
- Save the G-code file to your computer
- Open Pronterface and connect to Gigabot
- In Pronterface click on Load File and open the G-code file generated by Slic3r.
- The tool path should show in the Pronterface preview window
- Click "Print" and Gigabot will begin heating the bed, then heating the hot-end and then begin printing.