What types of plastic can I print on my Gigabot?
From re:3D
Your Gigabot can print many types of plastic filament. Any 3mm diameter plastic filament that can be extruded at less than 245C will print with your Gigabot. The re:3D engineering team has tested the following filaments on Gigabot:
Contents
PLA -Recommended for ease of printing and versatility of use
- Hot-end temp of 200-220C
- Bed temp 60C with BuildTak or 70C with blue painter's tape
- Print speed of 3600 - 6000mm/min
ABS -More resistant to harsh environments but more warp and twist than PLA
- Hot-end temp of 220-230C
- Bed temp 85C with BuildTak or 100C with blue painter's tape
- Print speed of 3000mm/min
Ninja SemiFlex
- Hot-end temp of 215-220C
- Bed temp 20-50C with BuildTak
- Print speed of 1800mm/min
EcoFlex PLA -Flexible PLA
- Hot-end temp of 210-220C
- Bed temp 40C with BuildTak
- Print speed of 1500mm/min
Tritan by www.taulman3d.com
- Hot-end temp of 270-290C (requires all-metal hotend)
- Bed temp 80C with BuildTak or Bed temp 85C on aluminum plate and Elmer's glue stick [[1]].
- Print speed of 1800mm/min
File:Re3D Specimen Analysis Summer 2015.docx Material Research