What types of plastic can I print on my Gigabot?
From re:3D
Your Gigabot can print many types of plastic filament. Any 3mm diameter plastic filament that can be extruded at less than 245C will print with your Gigabot. The re:3D engineering team has tested the following filaments on Gigabot:
Contents
PLA -Recommended for ease of printing and versatility of use
- Hot-end temp of 200-220C
- Bed temp 60C with BuildTak or 70C with blue painter's tape
- Print speed of 3600mm/min
ABS -More resistant to harsh environments but tend to warp and twist more than PLA
- Hot-end temp of 220-230C
- Bed temp 85C with BuildTak or 100C with blue painter's tape
- Print speed of 3000mm/min
NinjaFlex -Flexible PLA
- Hot-end temp of 210-225C
- Bed temp 20-50C with BuildTak
- Print speed of 1800mm/min
EcoFlex PLA -Flexible PLA
- Hot-end temp of 210-220C
- Bed temp 40C with BuildTak
- Print speed of 1500mm/min
Tritan by Taulman3D www.taulman3d.com
- Hot-end temp of 270-290C (requires all-metal hotend)
- Bed temp 80C with BuildTak
- Print speed of 1800mm/min
Coming soon: