Difference between revisions of "First Print"
From re:3D
(Created page with "===First Print=== We recommend your first print to be a simple test square. This test square will tell us a lot about how well your Gigabot is printing. :Download the FIL...") |
(No difference)
|
Revision as of 13:18, 29 July 2014
First Print
We recommend your first print to be a simple test square. This test square will tell us a lot about how well your Gigabot is printing.
- Download the File:20mm-box.stl
- Open Slic3r and import the 20mm-box.stl
- Check that the Gigabot settings are selected and active in Slic3r
- From the main screen in Slic3r click on Export G-code
- Open Pronterface and connect to Gigabot
- In Pronterface click on Load File and open the G-code file generated by Slic3r.
- The tool path should show in the Pronterface preview window
- Set the hot-end temperature to 200C
- Once hot-end is up to temp then click extrude
