Viki installation

From re:3D
Revision as of 21:19, 19 August 2014 by Matthew (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Replacing the Viki LCD control board

  1. Remove the four screws securing the aluminum LCD enclosure end plate with the cable grommet.
  2. Slide out the enclosure plate with the Viki attached.
  3. Note orientation and location of two wire bundles.
  4. Unplug cables from old unit and plug into new one
  5. Remove M3 screws fixing the old Viki to the cover plate
  6. Replace old Viki with new one
  7. Reassemble and test unit
Retrieved from "http://wiki.re3d.org/index.php?title=Viki_installation&oldid=6123"