Difference between revisions of "Quick Start Guide"
From re:3D
| Line 8: | Line 8: | ||
<blockquote> | <blockquote> | ||
G1 F3600.000 E-0.50000 | G1 F3600.000 E-0.50000 | ||
| + | |||
G92 E0 | G92 E0 | ||
| + | |||
G1 Z0.350 F12000.000 | G1 Z0.350 F12000.000 | ||
| + | |||
G1 X-10.000 Y-16.620 | G1 X-10.000 Y-16.620 | ||
| + | |||
G1 F3600.000 E0.50000 | G1 F3600.000 E0.50000 | ||
| + | |||
G1 X10.000 Y-16.620 F2160.000 E2.31859 | G1 X10.000 Y-16.620 F2160.000 E2.31859 | ||
Revision as of 19:04, 20 December 2013
A 3D printer takes a 3D model and turns in into a plastic part. To do this there are a number of pieces of software complete this task. We suggest the following open source applications:
Slic3r takes a 3D model (usually a .stl file) and turns it into Gcode. Gcode is the instructions for the 3D printer to create the part.
G1 F3600.000 E-0.50000
G92 E0
G1 Z0.350 F12000.000
G1 X-10.000 Y-16.620
G1 F3600.000 E0.50000
G1 X10.000 Y-16.620 F2160.000 E2.31859G1 X11.290 Y-16.500 E2.43640
G1 X12.540 Y-16.120 E2.55520
G1 X13.680 Y-15.510 E2.67276
