Difference between revisions of "Quick Start Guide"
From re:3D
Line 1: | Line 1: | ||
A 3D printer takes a 3D model and turns in into a plastic part. To do this there are a number of pieces of software complete this task. We suggest the following open source applications: | A 3D printer takes a 3D model and turns in into a plastic part. To do this there are a number of pieces of software complete this task. We suggest the following open source applications: | ||
− | |||
− | Slic3r | + | '''[http://slic3r.org/ Slic3r:]''' |
+ | Slic3r takes a 3D model (usually a .stl file) and turns it into Gcode. Gcode is the instructions for the 3D printer to create the part. | ||
+ | <blockquote> | ||
+ | G1 F3600.000 E-0.50000 | ||
+ | G92 E0 | ||
+ | G1 Z0.350 F12000.000 | ||
+ | G1 X-10.000 Y-16.620 | ||
+ | G1 F3600.000 E0.50000 | ||
+ | G1 X10.000 Y-16.620 F2160.000 E2.31859 | ||
+ | G1 X11.290 Y-16.500 E2.43640 | ||
+ | G1 X12.540 Y-16.120 E2.55520 | ||
+ | G1 X13.680 Y-15.510 E2.67276 | ||
+ | </blockquote> | ||
[http://reprap.org/wiki/RepRap_Options#Software_Toolchain Software Toolchain (reprap.org)] | [http://reprap.org/wiki/RepRap_Options#Software_Toolchain Software Toolchain (reprap.org)] |
Revision as of 19:02, 20 December 2013
A 3D printer takes a 3D model and turns in into a plastic part. To do this there are a number of pieces of software complete this task. We suggest the following open source applications:
Slic3r takes a 3D model (usually a .stl file) and turns it into Gcode. Gcode is the instructions for the 3D printer to create the part.
G1 F3600.000 E-0.50000 G92 E0 G1 Z0.350 F12000.000 G1 X-10.000 Y-16.620 G1 F3600.000 E0.50000 G1 X10.000 Y-16.620 F2160.000 E2.31859 G1 X11.290 Y-16.500 E2.43640 G1 X12.540 Y-16.120 E2.55520 G1 X13.680 Y-15.510 E2.67276