Difference between revisions of "Quick Start Guide"
From re:3D
Line 1: | Line 1: | ||
To print a 3D design with your printer you will need a couple of | To print a 3D design with your printer you will need a couple of | ||
− | [http://reprap.org/wiki/RepRap_Options#Software_Toolchain] | + | [http://reprap.org/wiki/RepRap_Options#Software_Toolchain Software Toolchain (at reprap.org)] |
Revision as of 18:50, 20 December 2013
To print a 3D design with your printer you will need a couple of