Moving Gigabot through a doorway

From re:3D
Revision as of 16:25, 23 October 2014 by Matthew (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

How to pass Gigabot through a doorway less than 34" wide

Move Gigabot's bed up to or near the home position.

To remove the lower front frame cross-bar

Crossbar.jpg
  1. Loosen the M5 x 12 bolt securing the inside corner brace (both right and left side)
Step1.jpg
  1. Loosen three M5 x 8 bolts on the outside corner brace (both right and left side)
Step2.jpg
  1. Remove two M5 x 12 bolts attaching the side plate to the frame (both right and left side)
Step3.jpg
  1. Slide the lower frame piece down with the outside corner braces still attached
Retrieved from "http://wiki.re3d.org/index.php?title=Moving_Gigabot_through_a_doorway&oldid=6386"