Difference between revisions of "Known problems"
From re:3D
(Created page with "== Shifting in the Y axis== Gigabot has undergone several revision from it's inception. Early Gigabot printers had several different configurations of the cooling fan for the...") |
(No difference)
|
Revision as of 21:54, 17 August 2014
Shifting in the Y axis
Gigabot has undergone several revision from it's inception. Early Gigabot printers had several different configurations of the cooling fan for the electronics box. Through the change in fan configuration we have found that some of those configurations have caused the motor driver for the Y axis to overheat and cause shifting in the Y axis during the print.
