Difference between revisions of "Heated bed installation"
From re:3D
(Created page with "==Work in Progress== *I recommend to set the heated bed between 50 - 60C and maintain the same temperature through the entire print. *Changing temperature with the heated be...") |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | |||
| − | * | + | |
| + | See our picture guide here [http://re3d.dozuki.com/Guide/Installing+Your+Heated+Bed/8 Heated bed installation] | ||
| + | |||
| + | *We recommend setting the bed temperature between 50 - 60C and maintain the same temperature through the entire print. | ||
*Changing temperature with the heated bed can cause the print to come loose form the bed. | *Changing temperature with the heated bed can cause the print to come loose form the bed. | ||
Latest revision as of 00:03, 31 August 2014
See our picture guide here Heated bed installation
- We recommend setting the bed temperature between 50 - 60C and maintain the same temperature through the entire print.
- Changing temperature with the heated bed can cause the print to come loose form the bed.
