Difference between revisions of "Gigabot"
From re:3D
(→Motor Driver Voltage) |
|||
Line 28: | Line 28: | ||
=== Motor Driver Voltage === | === Motor Driver Voltage === | ||
− | X motor driver - 0.84 volts | + | *X motor driver - 0.84 volts |
− | Y motor driver - Max ~1.2 volts | + | *Y motor driver - Max ~1.2 volts |
− | Z motor driver - 1.0 volts | + | *Z motor driver - 1.0 volts |
− | Ext motor driver - 0.84 volts | + | *Ext motor driver - 0.84 volts |
− | + | ||
== Software == | == Software == | ||
We recommend using [http://arduino.cc/en/Main/OldSoftwareReleases Arduino IDE version 22] to load the firmware into gigabot's brain (aka azteeg controller board). This version is necessary to be compatible with some of the library's used to run the lcd screen. | We recommend using [http://arduino.cc/en/Main/OldSoftwareReleases Arduino IDE version 22] to load the firmware into gigabot's brain (aka azteeg controller board). This version is necessary to be compatible with some of the library's used to run the lcd screen. |
Revision as of 00:30, 26 November 2013
Contents
Overview
Scale
- 600mm x 600mm x 600mm build envelope (24” x 24” x 24”)
- 30X the print volume compared to leading desktop 3D printer
Printing
- 1.75 or 3mm filament
- 100 micron layer capability
Capability
- Mechanics optimized for reliability
- Utilizes an open source software work flow
Electrical
- Print speed of 100mm/sec and above
- Rapid travel of 200mm/ sec
- Azteeg X3 Printer Controller
- 150 Watt power requirement
Hardware
- Rigid aluminum extrusion frame
- Open construction provides easy access to prints
- Complete printer weight 100lbs
Hardware
See assembly instructions here re3d.dozuki.com
Motor Driver Voltage
- X motor driver - 0.84 volts
- Y motor driver - Max ~1.2 volts
- Z motor driver - 1.0 volts
- Ext motor driver - 0.84 volts
Software
We recommend using Arduino IDE version 22 to load the firmware into gigabot's brain (aka azteeg controller board). This version is necessary to be compatible with some of the library's used to run the lcd screen.