Difference between revisions of "Gigabot"
From re:3D
Line 28: | Line 28: | ||
== Software == | == Software == | ||
+ | We recommend using [http://arduino.cc/en/Main/OldSoftwareReleases Arduino IDE version 22] to load the firmware into gigabot's brain (aka azteeg controller board). This version is necessary to be compatible with some of the library's used to run the lcd screen. |
Revision as of 00:20, 26 November 2013
Contents
Overview
Scale
600mm x 600mm x 600mm build envelope (24” x 24” x 24”) 30X the print volume compared to leading desktop 3D printer
Printing
1.75 or 3mm filament 100 micron layer capability
Capability
Mechanics optimized for reliability Utilizes an open source software work flow
Electrical
Print speed of 100mm/sec and above Rapid travel of 200mm/ sec Azteeg X3 Printer Controller 150 Watt power requirement
Hardware
Rigid aluminum extrusion frame Open construction provides easy access to prints Complete printer weight 100lbs
Hardware
See assembly instructions here re3d.dozuki.com
Software
We recommend using Arduino IDE version 22 to load the firmware into gigabot's brain (aka azteeg controller board). This version is necessary to be compatible with some of the library's used to run the lcd screen.