Difference between revisions of "Gigabot"
From re:3D
Line 10: | Line 10: | ||
===== Capability ===== | ===== Capability ===== | ||
Mechanics optimized for reliability | Mechanics optimized for reliability | ||
− | + | Utilizes an open source software work flow | |
===== Electrical ===== | ===== Electrical ===== | ||
Print speed of 100mm/sec and above | Print speed of 100mm/sec and above | ||
− | + | Rapid travel of 200mm/ sec | |
− | + | Azteeg X3 Printer Controller | |
− | + | 150 Watt power requirement | |
===== Hardware ===== | ===== Hardware ===== | ||
− | |||
Rigid aluminum extrusion frame | Rigid aluminum extrusion frame | ||
− | + | Open construction provides easy access to prints | |
− | + | Complete printer weight 100lbs | |
== Hardware == | == Hardware == | ||
− | + | See assembly instructions here [http://re3d.dozuki.com/c/Gigabot re3d.dozuki.com] | |
− | See assembly | + | |
== Software == | == Software == |
Revision as of 00:14, 26 November 2013
Contents
Overview
Scale
600mm x 600mm x 600mm build envelope (24” x 24” x 24”) 30X the print volume compared to leading desktop 3D printer
Printing
1.75 or 3mm filament 100 micron layer capability
Capability
Mechanics optimized for reliability Utilizes an open source software work flow
Electrical
Print speed of 100mm/sec and above Rapid travel of 200mm/ sec Azteeg X3 Printer Controller 150 Watt power requirement
Hardware
Rigid aluminum extrusion frame Open construction provides easy access to prints Complete printer weight 100lbs
Hardware
See assembly instructions here re3d.dozuki.com