Revision history of "File:20mm-box.gcode.txt"

Jump to: navigation, search

Diff selection: Mark the radio boxes of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

  • (cur | prev) 20:40, 28 December 2013‎ Gerty (Talk | contribs)‎ . . (169 bytes) (+169)‎ . . (Remove the .txt extension if you need to. this G-code was created using Slic3r 0.9.10b, the 20mm-box.stl mesh file, and the Gigabot_Slic3r_config.ini file in this wiki.)
Retrieved from "http://wiki.re3d.org/index.php/File:20mm-box.gcode.txt"