Gigabot

Overview

Scale

• 600mm x 600mm x 600mm build envelope (24” x 24” x 24”)
• 30X the print volume compared to leading desktop 3D printer

Printing

• 1.75 or 3mm filament
• 100 micron layer capability

Capability

• Mechanics optimized for reliability
• Utilizes an open source software work flow

Electrical

• Print speed of 100mm/sec and above
• Rapid travel of 150mm/ sec
• Azteeg X3 Printer Controller
• 150 Watt power requirement
• Optional Viki LCD hand held pendent with aluminum enclosure

Hardware

• Rigid aluminum extrusion frame
• Open construction provides easy access to prints
• Complete printer weight 100lbs

Hardware

See assembly instructions here re3d.dozuki.com

Motor Driver Voltage

• X motor driver - 0.84 volts
• Y motor driver - 1.2 volts
• Z motor driver - 1.0 volts
• Ext motor driver - 0.84 volts

Software

We recommend using Arduino IDE version 22 to load the firmware into gigabot's brain (aka azteeg controller board). This version is necessary to be compatible with some of the library's used to run the lcd screen.

Build

PartsPack