Viki installation

Viki Case

Download the printed Viki Holder here: File:Viki holder3 rotated.stl

.pdf instruction manual File:Re3D Viki 2 Full 10-21-2015.pdf

Replacing the Viki LCD display board

1. Remove the four screws securing the aluminum LCD enclosure end plate with the cable grommet.
2. Slide out the enclosure plate with the Viki attached.
3. Note orientation and location of two wire bundles.
4. Unplug cables from old unit and plug into new one
5. Remove M3 screws fixing the old Viki to the cover plate
6. Replace old Viki with new one
7. Reassemble and test unit

Viki Case