Moving Gigabot through a doorway
From re:3D
How to pass Gigabot through a doorway less than 34" wide
Move Gigabot's bed up to or near the home position.
To remove the lower front frame cross-bar
Loosen one M5 x 12 bolt and remove one M5 x 12 bolt securing the inside corner brace (both right and left side)
Loosen three M5 x 8 bolts on the outside corner brace (both right and left side)
Remove two M5 x 12 bolts attaching the side plate to the frame (both right and left side)
Slide the lower frame piece down with the outside corner braces still attached