Difference between revisions of "Viki installation"
From re:3D
(Created page with "==Replacing the Viki LCD control board== #Remove the four screws securing the aluminum LCD enclosure end plate with the cable grommet. #Slide out the enclosure plate with the...") |
(No difference)
|
Revision as of 21:19, 19 August 2014
Replacing the Viki LCD control board
- Remove the four screws securing the aluminum LCD enclosure end plate with the cable grommet.
- Slide out the enclosure plate with the Viki attached.
- Note orientation and location of two wire bundles.
- Unplug cables from old unit and plug into new one
- Remove M3 screws fixing the old Viki to the cover plate
- Replace old Viki with new one
- Reassemble and test unit
