Gigabot Kit

From re:3D
Revision as of 17:43, 16 August 2016 by Jeric (Talk | contribs)

Jump to: navigation, search
Alt text
WORK IN PROGRESS: Revised GB3 Assembly Manual
Alt text
GB3 Assembly Manual Part 2 or 2
Alt text
GB3 Assembly Manual Part 1 or 2
Instruction Manual Addendums

[GB3 running edit log for kit instructions until revised editions can be made]

[GB3 Panduit sizing and placement list]

[GB3 Dual Extruder Kit Packing List]

[GB3 Single Extruder Kit Packing List]



Alt text
GB2 Assembly Manual


Gigabot Wiring Diagrams

GB3 Dual Extruder Wiring Diagram

Viki 1.0 and Azteeg 1.0

Viki 2.0 and Azteeg 1.2

Viki 2.0 and Azteeg 2.0


Installing software and printing

  1. Installing and using software with Gigabot
  2. Firmware installation
  3. Calibrating your Gigabot
  4. Applying BuildTak print surface
  5. First Print

Getting the most from your Gigabot

  1. Getting a good print
  2. Printing from Gigabot's Viki controller
  3. Changing the filament spool
  4. Gigabot maintenance schedule
Retrieved from "http://wiki.re3d.org/index.php?title=Gigabot_Kit&oldid=7087"