Gigabot Troubleshooting - Revision history

Louis: /* Poor Print Quality */

2020-02-18T22:00:11Z

‎Poor Print Quality

2019-12-18T03:36:47Z

2019-11-20T16:12:15Z

‎Recovering a print

2019-11-20T16:11:57Z

‎Recovering a print

2019-11-20T16:11:43Z

‎Recovering a print

2019-10-15T14:50:41Z

‎Recovering a print

2019-10-15T00:54:49Z

‎Recovering a print

2019-06-12T20:47:46Z

‎Recovering a print

2019-06-12T20:30:00Z

‎Print is offset after filament change

2019-06-12T20:26:52Z

‎Thermal Runaway

← Older revision		Revision as of 22:00, 18 February 2020
Line 355:		Line 355:
	#After choosing the layer, click "Generate reCovery File." There will be a text prompt that confirms when the new .gcode has been generated. They are automatically saved in the same location as the original .gcode with a modified file name.		#After choosing the layer, click "Generate reCovery File." There will be a text prompt that confirms when the new .gcode has been generated. They are automatically saved in the same location as the original .gcode with a modified file name.
	#Print this .gcode file and it will resume where the previous print left off.		#Print this .gcode file and it will resume where the previous print left off.
−
−	~~=Poor Print Quality=~~
−	~~#Underextrusion~~
−	~~##Check extruder body tensioner nuts~~

← Older revision		Revision as of 03:36, 18 December 2019
Line 355:		Line 355:
	#After choosing the layer, click "Generate reCovery File." There will be a text prompt that confirms when the new .gcode has been generated. They are automatically saved in the same location as the original .gcode with a modified file name.		#After choosing the layer, click "Generate reCovery File." There will be a text prompt that confirms when the new .gcode has been generated. They are automatically saved in the same location as the original .gcode with a modified file name.
	#Print this .gcode file and it will resume where the previous print left off.		#Print this .gcode file and it will resume where the previous print left off.
		+
		+	=Poor Print Quality=
		+	#Underextrusion
		+	##Check extruder body tensioner nuts

@@ Line 309: / Line 309: @@
 [https://drive.google.com/file/d/1zyEb8Ok3Abe4a82krNNnDgHQbcMr-v2b/view?usp=sharing Link to reCovery program.] Download and unzip the contents, and the .exe should be available to use immediately.
-Warning: The recovery application currently works for single extrusion left side prints only. We are working on the tool to make it work for all other prints as well.
+'''Warning:''' The recovery application currently works for single extrusion left side prints only. We are working on the tool to make it work for all other prints as well.
 #Prints can be recovered from

← Older revision		Revision as of 16:11, 20 November 2019
Line 308:		Line 308:

	[https://drive.google.com/file/d/1zyEb8Ok3Abe4a82krNNnDgHQbcMr-v2b/view?usp=sharing Link to reCovery program.] Download and unzip the contents, and the .exe should be available to use immediately.		[https://drive.google.com/file/d/1zyEb8Ok3Abe4a82krNNnDgHQbcMr-v2b/view?usp=sharing Link to reCovery program.] Download and unzip the contents, and the .exe should be available to use immediately.
		+
	Warning: The recovery application currently works for single extrusion left side prints only. We are working on the tool to make it work for all other prints as well.		Warning: The recovery application currently works for single extrusion left side prints only. We are working on the tool to make it work for all other prints as well.

← Older revision		Revision as of 16:11, 20 November 2019
Line 308:		Line 308:

	[https://drive.google.com/file/d/1zyEb8Ok3Abe4a82krNNnDgHQbcMr-v2b/view?usp=sharing Link to reCovery program.] Download and unzip the contents, and the .exe should be available to use immediately.		[https://drive.google.com/file/d/1zyEb8Ok3Abe4a82krNNnDgHQbcMr-v2b/view?usp=sharing Link to reCovery program.] Download and unzip the contents, and the .exe should be available to use immediately.
		+	Warning: The recovery application currently works for single extrusion left side prints only. We are working on the tool to make it work for all other prints as well.

	#Prints can be recovered from		#Prints can be recovered from

@@ Line 321: / Line 321: @@
 ##Filament Ground through or stopped extruding on all nozzles printing
 ##Print shifted so far or recently that the part after shift is removable from bottom part
 #Prints cannot be recovered from
 ##Filament Detection failed for one of the two nozzles printing

@@ Line 331: / Line 331: @@
 #Measure the total height of the as-printed part, from the print surface to the highest printed layer.
 ##Try to get an accurate measurement. This is very important in resuming at the correct layer.
 ##Convert the measurement to mm and enter the value in the field after "What is the approximate height measurement of the failed print?"
 #Click "Yes" or "No" for "Did your printer reset? (i.e. Power Outage)"

@@ Line 280: / Line 280: @@
 #Update to latest firmware
-Note: Latest firmware slows down homing speed - better repeatability
+Note: Next iteration of the firmware (currently in progress) will address this issue and will most likely be available Aug 2019
 =Filament detection not triggering=

@@ Line 26: / Line 26: @@
 #Replace heater cartridge
 #Update firmware
-#Contact support if troubleshooting fails at [https://support@re3d.org support@re3d.org]
+#Contact support if troubleshooting fails at [mailto:support@re3d.org support@re3d.org]
 =Max Temp=